Magnetic core-shell cellulose system for the oriented immobilization of a recombinant ß-galactosidase with a protein tag.

The objective of this study was to immobilize a recombinant ß-galactosidase (Gal) tagged with a cellulose-binding domain (CBD) onto a magnetic core-shell (CS) cellulose system. After 30 min of reaction, 4 U/capsule were immobilized (CS@Gal), resulting in levels of yield and efficiency exceeding 80 %. The optimal temperature for ß-galactosidase-CBD activity increased from 40 to 50 °C following oriented immobilization. The inhibitory effect of galactose decreased in the enzyme reactions catalyzed by CS@Gal, and Mg2+ increased the immobilized enzyme activity by 40 % in the magnetic CS cellulose system. The relative enzyme activity of the CS@Gal was 20 % higher than that of the soluble enzyme activity after 20 min at 50 °C. The CS support and CS@Gal capsules exhibited an average size of 8 ± 1 mm, with the structure of the shell (alginate-pectin-cellulose) enveloping and isolating the magnetic core. The immobilized ß-galactosidase-CBD within the magnetic CS cellulose system retained ∼80 % of its capacity to hydrolyze lactose from skim milk after 10 reuse cycles. This study unveils a novel and promising support for the oriented immobilization of recombinant ß-galactosidase using a magnetic CS system and a CBD tag. This support facilitates ß-galactosidase reuse and efficient separation, consequently enhancing the catalytic properties of the enzyme.

Lactose hydrolysis in packed-and fluidized-bed reactors using a recombinant ß-galactosidase immobilized on magnetic core-shell capsules.

The objective of this study was to develop a bioprocess for lactose hydrolysis in diverse dairy matrices, specifically skim milk and cheese whey, utilizing column reactors employing a core-shell enzymatic system featuring ß-galactosidase fused to a Cellulose Binding Domain (CBD) tag (ß-galactosidase-CBD). The effectiveness of reactor configurations, including ball columns and toothed columns operating in packed and fluidized-bed modes, was evaluated for catalyzing lactose hydrolysis in both skim milk and cheese whey. In a closed system, these reactors achieved lactose hydrolysis rates of approximately 50% within 5 h under all evaluated conditions. Considering the scale of the bioprocess, the developed enzymatic system was capable of continuously hydrolyzing 9.6 L of skim milk while maintaining relative hydrolysis levels of approximately 50%. The biocatalyst, created by immobilizing ß-galactosidase-CBD on magnetic core-shell capsules, exhibited exceptional operational stability, and the proposed bioprocess employing these column reactors showcases the potential for scalability.

In Silico Strategies to Predict Anti-aging Features of Whey Peptides.

We have analysed the in silico potential of bioactive peptides from cheese whey, the most relevant by-product from the dairy industry, to bind into the active site of collagenase and elastase. The peptides generated from the hydrolysis of bovine ß-lactoglobulin with three proteases (trypsin, chymotrypsin, and subtilisin) were docked onto collagenase and elastase by molecular docking. The interaction models were ranked according to their free binding energy using molecular dynamics simulations, which showed that most complexes presented favourable interactions. Interactions with elastase had significantly lower binding energies than those with collagenase. Regarding the interaction site, it was found that four bioactive peptides were positioned in collagenase's active site, while six were found in elastase's active site. Among these, the most we have found one promising collagen-binding peptide produced by chymotrypsin and two for elastase, produced by subtilisin and chymotrypsin. These in silico results can be used as a tool for designing further experiments aiming at testing the in vitro potential of the peptides found in this work.

Anti-inflammatory potential of lactic acid bacteria from southern Brazil by reducing TNF-α and increasing IL-10 synthesis: an in vitro study.

AIMS: To evaluate the adhesion capacity and anti-inflammatory activity of lactic acid bacteria (LAB) isolated from raw cow milk and artisan cheese in Southern Brazil, investigating their effect on the release of cytokines such as TNF-α and IL-10 and their influence on the activation of the p38/MAPK pathway. METHODS AND RESULTS: Lentilactobacillus parabuchneri ML4, Lacticaseibacillus paracasei ML33, Lactiplantibacillus pentosus ML82, Lactiplantibacillus plantarum CH131, and L. paracasei CH135 demonstrated high adhesion potential in an in vitro model of the intestinal epithelium, as well as anti-inflammatory activity. After a 4-hour treatment, the strains significantly increased TNF-α levels, while a 24-hour treatment led to a significant decrease in TNF-α release. Moreover, IL-10 levels significantly increased after 24-hour and 48-hour treatments with LAB. The inhibition of p38/MAPK phosphorylation was identified as one of the mechanisms by which the L. paracasei ML33 and L. plantarum CH131 strains suppressed the production and release of TNF-α. CONCLUSIONS: We identified LAB strains with potential anti-inflammatory properties that could adhere to the intestinal mucosa and alleviate the inflammatory response by reducing the production and release of TNF-α through the inhibition of the p38/MAPK pathway, while promoting the production of IL-10.

A systematic review and meta-analysis of validated analytical techniques for the determination of total selenium in foods and beverages.

The intricate balance between the beneficial and harmful effects of selenium (Se) intake means that its quantification in food needs to be done correctly. Therefore, in this review, we systematized 105 articles to identify the most studied methodologies, analytical techniques, and food matrices. Among the analytical techniques employed, inductively coupled plasma mass spectrometry (ICP-MS) (n = 29) emerged as the most commonly used method. The most prevalent hydrolysis methodology to digest Se in food matrices involved the use of nitric acid combined with ultrasound, which improved both the yield and digestion time. Optimal recovery values were achieved when total Se quantification accounted for the sum of Se(IV) and Se(VI) (94.4-99.4%) and for SeCys (88-96.5%). These findings are relevant for advancing methodological approaches, and their results emphasize the importance of developing alternative, faster, and lower-cost protocols for Se quantification in foods and beverages.

A systematic review about affinity tags for one-step purification and immobilization of recombinant proteins: integrated bioprocesses aiming both economic and environmental sustainability.

The present study reviewed and discussed the promising affinity tags for one-step purification and immobilization of recombinant proteins. The approach used to structure this systematic review was The Preferred Reporting Items for Systematic Review and Meta-analysis (PRISMA) methodology. The Scopus and Web of Science databases were used to perform the bibliographic survey by which 267 articles were selected. After the inclusion/exclusion criteria and the screening process, from 25 chosen documents, we identified 7 types of tags used in the last 10 years, carbohydrate-binding module tag (CBM), polyhistidine (His-tag), elastin-like polypeptides (ELPs), silaffin-3-derived pentalysine cluster (Sil3k tag), N-acetylmuramidase (AcmA tag), modified haloalkane dehalogenase (HaloTag®), and aldehyde from a lipase polypeptide (Aldehyde tag). The most used bacterial host for expressing the targeted protein was Escherichia coli and the most used expression vector was pET-28a. The results demonstrated two main immobilization and purification methods: the use of supports and the use of self-aggregating tags without the need of support, depending on the tag used. Besides, the chosen terminal for cloning the tag proved to be very important once it could alter enzyme activity. In conclusion, the best tag for protein one-step purification and immobilization was CBM tag, due to the eco-friendly supports that can be provided from industry wastes, the fast immobilization with high specificity, and the reduced cost of the process.

Probiotic applications associated with Psyllium fiber as prebiotics geared to a healthy intestinal microbiota: A review.

Gastrointestinal tract diseases are characterized by an imbalance in physiological functions, which may involve inflammatory and metabolic pathways and trigger chronic, multifactorial, and idiopathic inflammatory disorders. The association of probiotics with prebiotics has the potential to remedy these afflictive conditions, because they attenuate or even block the adhesion of pathogenic microorganisms in the enteric environment. This article highlights the importance of using probiotics associated with fibers from Psyllium as prebiotics to maintain a healthy intestinal microbiota. We also present the technologies and encapsulating materials involved in coating to increase the survival rate of these strains when exposed to the gastrointestinal tract. The importance of products containing probiotics and fibers from Psyllium as prebiotics becomes increasingly evident when there is a health bias. Emerging health challenges and advances in research will drive selective approaches in biotechnology to discover and evaluate new probiotics and prebiotics that can potentially contribute to human health.

Application of cellulosic materials as supports for single-step purification and immobilization of a recombinant ß-galactosidase via cellulose-binding domain.

This study aimed to develop single-step purification and immobilization processes on cellulosic supports of ß-galactosidase from Kluyveromyces sp. combined with the Cellulose-Binding Domain (CBD) tag. After 15 min of immobilization, with an enzymatic load of 150 U/gsupport, expressed activity values reached 106.88 (microcrystalline cellulose), 115.03 (alkaline nanocellulose), and 108.47 IU/g (acid nanocellulose). The derivatives produced were less sensitive to the presence of galactose in comparison with the soluble purified enzyme. Among the cations assessed (Na+, K+, Mg2+, and Ca2+), magnesium provided the highest increase in the enzymatic activity of ß-galactosidases immobilized on cellulosic supports. Supports and derivatives showed no cytotoxic effect on the investigated cell cultures (HepG2 and Vero). Derivatives showed high operational stability in the hydrolysis of milk lactose and retained from 53 to 64% of their hydrolysis capacity after 40 reuse cycles. This study obtained biocatalyzers with promising characteristics for application in the food industry. Biocatalyzers were obtained through a low-cost one-step sustainable bioprocess of purification and immobilization of a ß-galactosidase on cellulose via CBD.

One-step purification of a recombinant beta-galactosidase using magnetic cellulose as a support: Rapid immobilization and high thermal stability.

For the first time, this work reported the one-step purification and targeted immobilization process of a ß-galactosidase (Gal) with the Cellulose Binding Domain (CBD) tag, by binding it to different magnetic cellulose supports. The process efficiency after ß-galactosidase-CBD immobilization on magnetic cellulose-based supports showed values of approximately 90% for all evaluated enzymatic loads. Compared with free Gal, derivatives showed affinity values between ß-galactosidase and the substrate 1.2 × higher in the lactose hydrolysis of milk. ß-Galactosidase-CBD's oriented immobilization process on supports increased the thermal stability of the immobilized enzyme by up to 7 × . After 15 cycles of reuse, both enzyme preparations showed a relative hydrolysis percentage of 50% of lactose in milk. The oriented immobilization process developed for purifying recombinant proteins containing the CBD tag enabled the execution of both steps simultaneously and quickly and the obtention of ß-galactosidases with promising catalytic characteristics for application in the food and pharmaceutical industries.

Synthesis of magnetic nanoparticles functionalized with histidine and nickel to immobilize His-tagged enzymes using ß-galactosidase as a model.

The aim of this study was to synthesize iron magnetic nanoparticles functionalized with histidine and nickel (Fe3O4-His-Ni) to be used as support materials for oriented immobilization of His-tagged recombinant enzymes of high molecular weight, using ß-galactosidase as a model. The texture, morphology, magnetism, thermal stability, pH and temperature reaction conditions, and the kinetic parameters of the biocatalyst obtained were assessed. In addition, the operational stability of the biocatalyst in the lactose hydrolysis of cheese whey and skim milk by batch processes was also assessed. The load of 600 Uenzyme/gsupport showed the highest recovered activity value (~50%). After the immobilization process, the recombinant ß-galactosidase (HisGal) showed increased substrate affinity and greater thermal stability (~50×) compared to the free enzyme. The immobilized ß-galactosidase was employed in batch processes for lactose hydrolysis of skim milk and cheese whey, resulting in hydrolysis rates higher than 50% after 15 cycles of reuse. The support used was obtained in the present study without modifying chemical agents. The support easily recovered from the reaction medium due to its magnetic characteristics. The iron nanoparticles functionalized with histidine and nickel were efficient in the oriented immobilization of the recombinant ß-galactosidase, showing its potential application in other high-molecular-weight enzymes.

Production of beta-galactosidase fused to a cellulose-binding domain for application in sustainable industrial processes.

This study aimed to produce and characterize a recombinant Kluyveromyces sp. ß-galactosidase fused to a cellulose-binding domain (CBD) for industrial application. In expression assays, the highest enzymatic activities occurred after 48 h induction on Escherichia coli C41(DE3) strain at 20 °C in Terrific Broth (TB) culture medium, using isopropyl ß-d-1-thiogalactopyranoside (IPTG) 0.5 mM (108.77 U/mL) or lactose 5 g/L (93.10 U/mL) as inducers. Cultures at bioreactor scale indicated that higher product yield values in relation to biomass (2000 U/g) and productivity (0.72 U/mL.h) were obtained in culture media containing higher protein concentration. The recombinant enzyme showed high binding affinity to nanocellulose, reaching both immobilization yield and efficiency values of approximately 70% at pH 7.0 after 10 min reaction. The results of the present study pointed out a strategy for recombinant ß-galactosidase-CBD production and immobilization, aiming toward the application in sustainable industrial processes using low-cost inputs.

Effect of by-products from the dairy industry as alternative inducers of recombinant ß-galactosidase expression.

OBJECTIVE: The aim of the present study was to evaluate the efficiency of lactose derived from cheese whey and cheese whey permeate as inducer of recombinant Kluyveromyces sp. ß-galactosidase enzyme produced in Escherichia coli. Two E. coli strains, BL21(DE3) and Rosetta (DE3), were used in order to produce the recombinant enzyme. Samples were evaluated for enzyme activity, total protein content, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis after induction with isopropyl-ß-D-1-thiogalactoside (IPTG) (0.05 and 1 mM) and lactose, cheese whey, and cheese whey permeate solutions (1, 10, and 20 g/L lactose) at shake-flask cultivation, and whey permeate solution (10 g/L lactose) at bioreactor scale. RESULTS: The highest specific activities obtained with IPTG as inducer (0.05 mM) after 9 h of induction, were 23 and 33 U/mgprotein with BL21(DE3) and Rosetta(DE3) strains, respectively. Inductions performed with lactose and cheese whey permeate (10 and 20 g/L lactose) showed the highest specific activities at the evaluated hours, exhibiting better results than those obtained with IPTG. Specific activity of recombinant ß-galactosidase using whey permeate (10 g/L lactose) showed values of approximately 46 U/mgprotein after 24-h induction at shake-flask study, and approximately 26 U/mgprotein after 16-h induction at bench bioreactor. CONCLUSIONS: The induction with cheese whey permeate was more efficient for recombinant ß-galactosidase expression than the other inducers tested, and thus, represents an alternative form to reduce costs in recombinant protein production.

An evaluation of the effects of probiotics on tumoral necrosis factor (TNF-α) signaling and gene expression.

The search for functional foods containing probiotics has been growing due to numerous benefits they provide to health, such as modulation of the immune system and of the anti-inflammatory activity by inhibiting the release of pro-inflammatory cytokines, such as TNF-α. However, the mechanisms of actions of the probiotics responsible for this inhibition have not been completely explained so far. A better understanding of the interaction between probiotics and cell signaling pathways related to inflammatory processes shall help to prevent inflammatory bowel diseases. Therefore, the aim of this revision is to help understand the mechanisms of action of probiotics in cell signaling pathways that regulate TNF-α expression. Probiotics might act at different points of the MAPK pathway, on NF-kB, on proteasome activity, on Toll-like receptors, and on their regulators and stimuli. The present revision reaches the conclusion that probiotics act through multiple mechanisms, especially by inhibiting IkB phosphorylation and degradation, thus preventing the translocation of NF-kB. Effects are also shown to be strain-specific, and probiotics of the genus Lactobacillus are proved to play and essential role in anti-inflammatory activity.

Magnetic cellulose: Versatile support for enzyme immobilization - A review.

Enzymes are proteins specialized in catalyzing biological reactions. However, factors such as cost and operational limitations could limit their applications in the industrial sector. An alternative to these limiting factors is enzyme immobilization, which enables reuse and increases biocatalyst stability. Cellulose can be employed in enzyme immobilization, and is an outstanding alternative due to availability and cost. Additionally, this material might undergo several chemical treatments, thus obtaining cellulose nanocrystals and nanofibers. The use of nanomaterials at an industrial scale requires more refined unit operations to separate them, a setback that can be solved by combining these materials to magnetic nanoparticles. This review shows important aspects for the synthesis and application of nanocellulose and magnetic nanoparticles. It also reports new trends and strategies to associate these materials. Magnetic cellulose is a versatile support for enzyme immobilization, so much so that different immobilization methods might be conducted using this material.

Encapsulation of Lactobacillus spp. using bovine and buffalo cheese whey and their application in orange juice.

The aim of this study was to evaluate and compare the efficiency of bovine (CW) and buffalo cheese whey (BCW) as encapsulating agents for the spray-drying (SD) of endogenous Lactobacillus pentosus ML 82 and the reference strain Lactobacillus plantarum ATCC 8014. Their protective features were also tested for resistance to storage (90 days, 25 °C), simulated gastrointestinal tract (GIT) conditions, and for their application in orange juice. Survival rates after SD were approximately 95% in all samples tested, meaning both CW and BCW performed satisfactorily. After 90 days of storage, both species remained above 7 log Colony Forming Units (CFU)/g. However, CW generally enabled higher bacterial viability throughout this period. CW microcapsule characteristics were also more stable, which is indicated by the fact that BCW had higher moist content. Under GIT conditions, encapsulated lactobacilli had higher survival rates than free cells regardless of encapsulating agent. Even so, results indicate that CW and BCW perform better under gastric conditions than intestinal conditions. Regarding their use in orange juice, coating materials were probably dissolved due to low pH, and both free and encapsulated bacteria had similar survival rates. Overall, CW and BCW are suitable encapsulating agents for lactic acid bacteria, as they provided protection during storage and against harmful GIT conditions.

A biotechnological approach for the production of branched chain amino acid containing bioactive peptides to improve human health: A review.

Improper nutrition provokes many types of chronic diseases and health problems, which consequently are associated with particularly high costs of treatments. Nowadays, consumer's interest in healthy eating is shifting towards specific foods or food ingredients. As a consequence, bioactive peptides as a promising source of health promoting food additives are currently an intensely debated topic in research. Process design is still on its early stages and is significantly influenced by important preliminary decisions. Thus, parameters like peptide bioactivity within the product, selection of the protein source, enzyme selection for hydrolysis, peptide enrichment method, as well as stability of the peptides within the food matrix and bioavailability are sensitive decision points, which have to be purposefully coordinated, as they are directly linked to amino acid content and structure properties of the peptides. Branched chain amino acids (BCAA) are essential components for humans, possessing various important physiologic functions within the body. Incorporated within peptide sequences, they may induce dual functions, when used as nutraceuticals in functional food, thus preserving the foodstuff and prevent several widespread diseases. Furthermore, there is evidence that consuming this peptide-class can be a nutritional support for elderly people or improve human health to prevent diseases caused by incorrect nutrition. Based on the knowledge about the role of BCAA within various peptide functions, discussed in the review, special attention is given to different approaches for systematic selection of the protein source and enzymes used in hydrolysis, as well as suitable peptide enrichment methods, thereby showing current trends in research.

Characterization of technological and probiotic properties of indigenous Lactobacillus spp. from south Brazil.

In this study, we isolated Lactobacillus spp. from bovine raw milk and artisanal cheese from southern Brazil, and evaluated their technological and probiotic potential to select new isolates for producing healthy fermented dairy foods with differentiated tastes and flavours. We obtained 48 new lactobacilli isolates, which were isolated from raw milk (38) and cheese (10). These bacterial isolates were closely related with ten species: Lactobacillus paracasei (50% of the isolates), L. parabuchneri (15%), L. pentosus (13%), L. zeae (4%), L. plantarum (4%), L. otakiensis (4%), L. casei (4%), L. harbinensis (2%), L. diolivorans (2%), and L. rhamnosus (2%). Isolates CH112 and CH131 showed the greatest acidification potential, reducing the pH of milk to below 5.3 after incubation for 6 h at 32 °C. Considering proteolytic activity and diacetyl production, isolates ML88a, ML04, and ML12 showed the most promising results. Isolate ML12 showed 100% survival rate when inoculated in gastric juice at pH 2.5. The evaluation of antibacterial activity of the lactobacilli showed that the pathogens Listeria monocytogenes, Staphylococcus aureus, Salmonella enteritidis, and Salmonella Typhimurium were strongly inhibited by the pure lactobacilli cultures. Five Lactobacillus isolates (ML01, ML04, ML12, ML88, and CH139) showed both technological and probiotic characteristics. Principal Component Analysis (PCA) was used to investigate correlations among technological and probiotic characteristics, and identified new promising lactobacilli isolates for exploring their characteristics. This study reveals the importance of selecting new microorganisms with potential applicability in the food industry for developing functional foods with differentiated aromas and flavours.

Assessment of selenium bioaccumulation in lactic acid bacteria.

Selenium is an essential micronutrient for living beings, as it helps to maintain the normal physiological functions of the organism. The numerous discoveries involving the importance of this element to the health of human beings have fostered interest in research to develop enriched and functional foods. The present study evaluated the potential for bacterial strains of Enterococcus faecalis (CH121 and CH124), Lactobacillus parabuchneri (ML4), Lactobacillus paracasei (ML13, ML33, CH135, and CH139), and Lactobacillus plantarum (CH131) to bioaccumulate Se in their biomass by adding different concentrations of sodium selenite (30 to 200 mg/L) to the culture medium. Quantification of Se with UV and visible molecular absorption spectroscopy showed that the investigated bacteria were able to bioaccumulate this micromineral into their biomass. Two of the L. paracasei strains (ML13 and CH135) bioaccumulated the highest Se concentrations (38.1 ± 1.7 mg/g and 40.7 ± 1.1 mg/g, respectively) after culture in the presence of 150 mg/L of Se. This bioaccumulation potential has applications in the development of dairy products and may be an alternative Se source in the diets of humans and other animals.

Development of alginate-pectin microparticles with dairy whey using vibration technology: Effects of matrix composition on the protection of Lactobacillus spp. from adverse conditions.

In this study, lactic acid bacteria with probiotic potential, including Lactobacillus plantarum ATCC8014, L. paracasei ML33 and L. pentosus ML82, were encapsulated with whey-alginate-pectin (WAP) or whey permeate-alginate-pectin (PAP) by an extrusion process using vibrational technology, with the resulting microparticles assessed for their resistance to adverse conditions. The aim was to assess the effect of the encapsulation wall materials on the viability of microorganisms, the encapsulation, refrigerated storage and simulated gastrointestinal tract conditions, the kinetic parameters of acidification, and the morphology of microparticles. The bacteria encapsulated with the WAP wall material were adequately protected. Furthermore, after three months of storage at 4 °C, the encapsulated bacteria exhibited a cell viability of >6 log CFU mL-1. In addition, the encapsulated L. plantarum ATCC8014 and L. pentosus ML82 isolates exhibited the highest viability at the end of the storage period among the assayed isolates. Encapsulated bacteria showed greater resistance to acidic conditions than unencapsulated bacteria when exposed to simulated gastrointestinal tract conditions. The maximum rate of milk acidification by encapsulated Lactobacillus spp. was approximately three-fold lower than that observed for unencapsulated bacteria. The resulting size of the microparticles generated using both combinations of wall materials used was approximately 150 µm. The cheese whey and whey permeate combined with alginate and pectin to adequately encapsulate and protect Lactobacillus spp. from the adverse conditions of the simulated gastrointestinal tract and from refrigeration storage temperatures. Furthermore, the sizes of the obtained microparticles indicated that the encapsulated materials are suitable for being incorporated into foods without changing their sensory properties.